cost of producing 10-in. and 12-in. pipe in-house.
Choosing the “most likely figure” seems to be a good and right decision, but actually it is not. It would be simple and easy to calculate but it has problems that it totally ignores other lower-probability cases. The most sales’ case is fine but what if annual sales turn to be the lowest one, 1,350lbs? It could be a serious problem becaus
Cost
가) 반응기류
Peters & Timmerhaus Fig. 13-15에 Jacketed reactor 가격정보 이용.
Reactor의 크기는 하루 최대 생산량에 대한 Material Balanc에 따라서 각각32KL, 3KL로 잡고 가격 정보를 확인한다.
Reactor 가격 정보는 달러로 나타나 있음으로 원화로 보정한다.
나) Tank 류
산화의 위험이
costs and revenue
a) Investment costs & Target figure
25 Students pay equally 30,000won
25 people * 30,000 won = 750,000 won
→ Target price was calculated after Setting as the investment
Collecting the views of staff and other costs resulting were estimated
target price of 1.5 million won.
- Analysis of materials.
7. Capital Investment Summary
1) Purchased Equipment Cost
가. 반응기류
- 장치비용을 줄이기 위해 중고 산업장비 구매를 가정.
- 현재 시중에서 중고로 거래되고 있는 장치의 중고가격을 기준으로 구매가 결정.
- 따라서 현재의 중고가 가격을 사용하므로 보정 필요 없음.
- Transesterification reactor(R-101A/B) → 산업
cost per LCD assembly, so we multiply $15 with labor hours per assembly which is 0.77
Cost per labor hour testing
Formula: 15x0.77x0.5/0.77
③Total Labor cost
Total Labor cost (Direct Labor)
Formula:
Cost per labor hour assembly x Labor hour per unit assembly +
Cost per labor hour testing x Labor hour per unit testing
④Direct Material cost, To
1. Required A
1990년대 시장의 전반적인 침체 상황.
내부적으로 product development, cost efficiency, material
purchasing, market adaption 등의 다양한 문제들에 봉착.
1993년, MB는 계속해서 판매부진을 겪게되고
사상 처음으로 손실을 기록하게 됨.
↓
1993년부터 AAV프로젝트 준비, 1997년에 AAV 출시.
빠르게
2.3.3 Process Explanation
1) Foolish Model
주어진 raw meterial에서 glucose를 얻는 당화공정과 이후 fermentation을 이용해 ethanol을 얻는 process로 실제의 공정보다 매우 단순화 되어있는 model. ethanol 생성공정을 거치면서 발생한 impurity는 이 모델에 포함된 centrifuge공정에 의해 분리되어 처리된다. foolish model의 output 으로
costs
Permeability & Energy consumption
If permeability is a high value, membrane area is decreasing.
It can decrease the costs of the desalination.
The thermodynamics limit of about 0.52kWh/
Objective
-Fouling and Scaling effect
-Salt rejection
-Energy consumption
※focus on Material and structural effect
1.Material improvement
-Chlorin